An Aptamer-Based Hydrogel Sensing Platform Enabling Low Micromolar Detection of Small Molecules Using Low Sample Volumes.

Poor fluorescence recovery at low analyte dosages and slow ligand binding kinetics are critical challenges currently limiting the use of aptamer-functionalized hydrogels for sensing small molecules. In this paper, we report an adenosine-responsive hydrogel sensor that integrates FRET-signaling aptamer switches into in situ-gelling thin-film hydrogels. The hydrogel sensor is able to entrap a high proportion of the sensing probes (>70% following vigorous washing), delay nucleolytic degradation, stabilize weak aptamer complexes to improve hybridization affinity and suppress fluorescence background, and provide high sensitivity in biological fluids (i.e., undiluted human serum). Furthermore, the developed hydrogel sensors were able to achieve low limits of detection (5.3 µM in buffer and 8.8 µM in serum) within 4 min of exposure to the sample, with signal generation requiring only 20 µL/well of analyte sample. The physical nature of the aptamer encapsulation allows this approach to accommodate virtually any small-molecule aptamer, avoiding the need for covalent anchoring and the complex modification of nucleic acid sequences typically required for effective aptamer-based molecular recognition.

Open air X-ray diffractometer for crystallography, compression, contraction, and structural phase transitions with variable temperature capabilities.

It is a fact that materials contract or expand by changing their temperature. In a certain temperature range, the distance between atoms changes linearly in some materials whereas it changes non-linearly in other materials. X-ray diffraction (XRD) is one of the popular techniques used for understanding the crystal structure of these materials. However, XRD is mostly carried in open air at room temperature or require very expensive high vacuum set-ups and expensive temperature controllers for low temperature studies. Here we propose a design of a variable temperature X-ray diffractometer that can operate in dual modes: heating and cooling in open air. The proposed diffractometer has been used for studying structural phase transition in chromium nitride thin films. The results demonstrated not only the effectiveness of our proposed setup but also its applicability in advancing our understanding of complex material behaviors.•A new design of a variable temperature X-ray diffractometer has been introduced in this paper, which can be used for acquiring XRD data while heating or cooling samples in open air.•As a proof of concept, the newly designed variable temperature X-ray diffractometer is used for studying structural phase transition in CrN thin films.

Synergistic optical sensing: Selective colorimetric analysis of copper in environmental and biological samples.

A groundbreaking optical sensing membrane has been engineered for the accurate assessment of copper ions. The pliable poly(vinyl chloride) membrane is formulated through the integration of sodium tetraphenylborate (Na-TPB), 4-(2-hydroxy-4-nitro azobenzene)-2-methyl-quinoline (HNAMQ), and tri-n-octyl phosphine oxide (TOPO), in conjunction with o-nitrophenyl octyl ether (o-NPOE). The sensor membrane undergoes a thorough investigation of its composition to optimize performance, revealing that HNAMQ serves a dual role as both an ionophore and a chromoionophore. Simultaneously, TOPO contributes to enhancing the complexation of HNAMQ with copper ions. Demonstrating a linear range for Cu2+ ions spanning from 5.0 × 10-9 to 7.5 × 10-6 M, the proposed sensor membrane showcases detection and quantification limits of 1.5 × 10-9 and 5.0 × 10-9 M, respectively. Rigorous assessments of potential interferences from other cations and anions revealed no observable disruptions in the detection of Cu2+. With no discernible HNAMQ leaching, the membrane demonstrates rapid response times and excellent durability. The sensor exhibits remarkable selectivity for Cu2+ ions and can be regenerated through exposure to 0.05 M EDTA. Successful application of the sensor in determining the presence of Cu2+ in biological (blood, liver and meat), soil, food (coffee, black tea, sour cherry juice, black currant, and milk powder) and environmental water samples underscores its efficacy.

Current Analytical Methods for the Sensitive Assay of New-Generation Ovarian Cancer Drugs in Pharmaceutical and Biological Samples.

Ovarian cancer, which affects the female reproductive organs, is one of the most common types of cancer. Since this type of cancer has a high mortality rate from gynaecological cancers, the scientific community shows great interest in studies on its treatment. Chemotherapy, radiotherapy, and surgical treatment methods are used in its treatment. In the absence of targeted treatments in these treatment methods, side effects occur in patients, and patients show resistance to the drug. In addition, the underlying causes of ovarian cancer are still not fully known. The scientific world thinks that genetic factors, environmental conditions, and consumed foods may cause this cancer. The most important factor in the treatment of ovarian cancer is early diagnosis. Therefore, the drugs used in the treatment of ovarian cancer are platinum-based anticancer drugs. In addition to these drugs, the most preferred treatment method recently is targeted treatment approaches using poly(adenosine diphosphate ribose) polymerase (PARP) inhibitors. In this review, studies on the sensitive analysis of the treatment methods of these new-generation drugs used in the treatment of ovarian cancer have been comprehensively examined. In addition, the basic features, structural aspects, and biological data of analytical methods used in treatments with new-generation drugs are explained. Analytical studies carried out in the literature in recent years aim to show future developments in how these new-generation drugs are used today and to guide future studies by comprehensively examining and explaining the structure-activity relationship, mechanism of action, toxicity, and pharmacokinetic studies. Finally, in this study, the methods used in the analysis of drugs used in the treatment of ovarian cancer and the studies conducted between 2015 and 2023 were discussed in detail.

Relationship Between Arsenic in Biological Media and Breast Cancer: A Systematic Review and Meta-Analysis.

Arsenic (As) is an environmental pollutant with carcinogenic effects and breast cancer (BC) is a prevalent malignant tumor in women. The goal of this meta-analysis was to establish a connection between biological sample As levels and the risk of developing BC. Pub Med, Web of Science, Scopus, and Elsevier were used to systematically screen the literature published between 1990 and 2023. The Newcastle-Ottawa scale was also used in assessing the quality of publications. A random-effects model was used to assess the pertinent data that was gleaned from these articles. Using the I2 index the heterogeneity of studies was performed. Egger's test and funnel plots were used to look at publication bias. We identified 16 epidemiologic studies that included 2713 women with BC and 5347 healthy individuals. The results showed that the difference between the case group and the control group was 0.72 [95% confidence interval (CI) 0.30 to 1.14]. According to subgroup analysis, the value for blood was 0.18 [95% CI 0.01 to 0.35], whereas the value for hair was 3.08 [95% CI 0.19 to 5.97]. The present meta-analysis suggested that As levels were significantly higher in BC patients than in controls. This systematic review and meta-analysis provide evidence supporting a positive relationship between arsenic levels in biological media and BC risk. These findings highlight the importance of further research to investigate the mechanisms of this association and explore potential preventive strategies to reduce the adverse effects of arsenic exposure on BC.

Development of dispersive solid phase extraction based on magnetic metal organic framework for the extraction of sunitinib in biological samples and its determination by high performance liquid chromatography-tandem mass spectrometry.

Herein, a simple, sensitive, and reliable dispersive solid phase extraction was reported for the efficient extraction of sunitinib from biological samples. To facilitate the extraction of the desired analyte from urine and plasma samples, magnetic MIL-101Cr (NH2) @SiO2 @ NiFe2O4 was synthesized by a hydrothermal method and applied as an effective sorbent during the extraction process. After adsorption of the drug using 10 mg of MIL-101Cr (NH2) @ SiO2 @ NiFe2O4 nanoparticles through vortexing (1 min), the sorbent was separatedfrom the sample solution using a magnet. To eluate the drug, the sorbent containing the sunitinib was contacted with 100 µL dimethylformamide. The eluent was analyzed by high performance liquid chromatography-tandem mass spectrometry. Reasonable validation data consisting of low limits of detection (0.14, 0.35, and 0.70 ng mL-1 in deionized water, plasma, and urine) and quantification (0.48, 1.2, and 2.4 ng mL-1 in deionized water, plasma, and urine, respectively), a wide linear range of the calibration curve (0.48-200, 1.2-200, and 2.4-100 ng mL-1 in deionized water, plasma, and urine, respectively) good extraction recovery (76 %), and low relative standard deviations for inter- and intra-day precisions (6.9 %) were obtained by the method. Eventually, the proposed procedure was effectively implemented on both plasma and urine samples, yielding successful outcomes.

Fiber-in-tube SPME-CapLC-MS/MS method to determine Aß peptides in cerebrospinal fluid obtained from Alzheimer's patients.

Mass spectrometry is characterized by its high sensitivity, ability to measure very low analyte concentrations, specificity to distinguish between closely related compounds, availability to generate high-throughput methods for screening, and high multiplexing capacity. This technique has been used as a platform to analyze fluid biomarkers for Alzheimer's disease. However, more effective sample preparation procedures, preferably antibody-independent, and more automated mass spectrometry platforms with improved sensitivity, chromatographic separation, and high throughput are needed for this purpose. This short communication discusses the development of a fiber-in-tube SPME-CapLC-MS/MS method to determine Aß peptides in cerebrospinal fluid obtained from Alzheimer's disease patients. To obtain the fiber-in-tube SPME capillary, we longitudinally packed 22 nitinol fibers coated with a zwitterionic polymeric ionic liquid into the same length of the PEEK tube. In addition, this communication compares this fiber-in-tube SPME method with the conventional HPLC scale (HPLC-MS/MS) and when directly coupled to CapESI-MS/MS without chromatographic separation, and, as a case study, discusses the benefits and challenges inherent in miniaturizing the flow scale of the sample preparation technique (fiber-in-tube SPME) to the CapLC-MS/MS system. Fiber-in-tube SPME-CapLC-MS/MS provided LLOQ ranging from 0.09 to 0.10 ng mL-1, accuracy ranging from 91 to 117 % (recovery), and reproducibility of less than 18 % (RSD). Analysis of the cerebrospinal fluid samples obtained from Alzheimer's disease patients evidenced that the method is robust. At the capillary scale (10 µL min-1), this innovative method presented higher analytical sensitivity than the conventional HPLC-MS/MS scale. Although fiber-in-tube SPME directly coupled to CapESI-MS/MS offers advantages in terms of high throughput, the sample was dispersed and non-quantitatively desorbed from the capillary at low flow rate. These results highlighted that chromatographic separation is important to decrease the matrix effect and to achieve higher detectability, which is indispensable for bioanalysis.

Novel LC-MS/MS Method for Simultaneous Determination of Monoamine Neurotransmitters and Metabolites in Human Samples.

For the simultaneous determination of monoamine neurotransmitters (NTs) like dopamine, serotonin, noradrenaline, and epinephrine, and their metabolites (metanephrine, normetanephrine, 3-methoxytyramine, vanillylmandelic acid, 3,4-dihydroxyphenylacetic acid, homovanillic acid, and 5-hydroxyindoleacetic acid), a robust liquid chromatography method coupled with tandem mass spectrometry (LC-MS/MS) was introduced as the analytical method. This analytical method proved to be accurate for the simultaneous measurement of the amounts of 11 NTs and their metabolites in biological samples. The method proved to be more efficient and better than the previously reported method in terms of precision, recovery, sample requirement, and extraction procedure. The reported method requires only 100 µL of blood and 200 µL of urine, and the extraction procedure requires acetonitrile precipitation, filtration, drying, and reconstitution in water. The separation of all analytes was performed on an C18 column (4.6 mm × 150 mm and 1.8 µm). A 10 min gradient elution program with a mobile phase consisting of phase A (0.2% formic acid in water) and phase B (methanol) was used. The positive ionization mode was used for the detection of all analytes in multiple reaction monitoring (MRM). The proposed method was validated with an internal standard and yielded lower limits of detection and quantification ranges of 0.0182-0.0797 ng/mL and 0.0553-0.2415 ng/mL, respectively, with a good linearity (R2) between 0.9959 and 0.9994. The recoveries ranged from 73.37% to 116.63% in blood and from 80.9% to 115.33% in urine. For the NTs and metabolites, the intra- and interday % CV were 0.24-9.36 and 0.85-9.67, respectively. The developed LC-MS/MS method was successfully used for the determination of trace amounts of endogenous compounds in human blood and urine samples.

Simultaneous Determination of One-Carbon Folate Metabolites and One-Carbon-Related Amino Acids in Biological Samples Using a UHPLC-MS/MS Method.

One-carbon folate metabolites and one-carbon-related amino acids play an important role in human physiology, and their detection in biological samples is essential. However, poor stability as well as low concentrations and occurrence in different species in various biological samples make their quantification very challenging. The aim of this study was to develop a simple, fast, and sensitive ultra-high-performance liquid chromatography MS/MS (UHPLC-MS/MS) method for the simultaneous quantification of various one-carbon folate metabolites (folic acid (FA), tetrahydrofolic acid (THF), p-aminobenzoyl-L-glutamic acid (pABG), 5-formyltetrahydrofolic acid (5-CHOTHF), 5-methyltetrahydrofolic acid (5-CH3THF), 10-formylfolic acid (10-CHOFA), 5,10-methenyl-5,6,7,8-tetrahydrofolic acid (5,10-CH+-THF), and 4-α-hydroxy-5-methyltetrahydrofolate (hmTHF)) and one-carbon-related amino acids (homocysteine (Hcy), methionine (Met), S-ade-L-homocysteine (SAH), and S-ade-L-methionine (SAM)). The method was standardized and validated by determining the selectivity, carryover, limits of detection, limits of quantitation, linearity, precision, accuracy, recovery, and matrix effects. The extraction methods were optimized with respect to several factors: protease-amylase treatment on embryos, deconjugation time, methanol precipitation, and proteins' isoelectric point precipitation on the folate recovery. Ten one-carbon folate metabolites and four one-carbon-related amino acids were detected using the UHPLC-MS/MS technique in various biological samples. The measured values of folate in human plasma, serum, and whole blood (WB) lay within the concentration range for normal donors. The contents of each analyte in mouse plasma were as follows: pABG (864.0 nmol/L), 5-CH3THF (202.2 nmol/L), hmTHF (122.2 nmol/L), Met (8.63 µmol/L), and SAH (0.06 µmol/L). The concentration of each analyte in mouse embryos were as follows: SAM (1.09 µg/g), SAH (0.13 µg/g), Met (16.5 µg/g), 5,10-CH+THF (74.3 ng/g), pABG (20.6 ng/g), and 5-CH3THF (185.4 ng/g). A simple and rapid sample preparation and UHPLC-MS/MS method was developed and validated for the simultaneous determination of the one-carbon-related folate metabolites and one-carbon-related amino acids in different biological samples.

Use of air things radon detector in liquid samples (serum and urine).

This study involved the assessment of 222Rn concentrations in liquid samples (namely serum and urine) obtained from individuals who were smokers and non-smokers across five distinct age groups in the Najaf Governorate of Iraq. The measurements were conducted using a portable digital Air Things device commonly employed for detecting radon gas in residential environments. This device was placed in a container that is placed in liquid samples, which makes it work to capture the existing radon. The mean value of radon concentrations in serum and urine samples for smokers was 5.64 ± 2.80 Bq/m3 and 3.56 ± 2.31 Bq/m3, respectively. While, the mean value of radon concentrations in serum and urine samples for non-smokers was 2.32 ± 0.67 Bq/m3 and 1.61 ± 1.00 Bq/m3, respectively. By comparing the radon concentrations for serum and urine samples with age and smoking groups, the value of P-Value (p < 0.01) was increased significantly statistically. Also, it is found that a positive and good correlation for radon concentrations between serum and urine. Although the levels of radon were found to be under the globally accepted thresholds, the results of 222Rn in all samples of serum and urine in smokers were higher than in non-smokers. Thus, it may be concluded that cigarette smoking is used as a biomarker of the presence of radon gas.

Gold nanoparticle-based selective and efficient spectrophotometric assay for the insecticide methamidophos.

A reliable, rapid, and inexpensive nano-sized chemosensor is presented for methamidophos (MET) - an insecticide. Poly(lactic acid) (PLA)-stabilized gold nanoparticles (AuNPs) were synthesized by a simple one-pot, two-phase chemical reduction method. The synthesized PLA-AuNPs were subsequently employed for selective, efficient, and quantitative detection of MET. MET is one of the highly toxic pesticides used for eradication of agricultural and urban insects. Upon the addition of MET, the wine-red color of PLA-AuNPs swiftly transformed into greyish-blue, further corroborated by a significant bathochromic and hyperchromic shift in the SPR band. The presence of other interfering insecticides, metal salts, and drugs did not have any pronounced effect on quantitative MET detection. The detection limit, the quantification limit, and linear dynamic range of MET utilizing PLA-AuNPs were  0.0027 µM, 0.005 µM, and 0.005-1000 µM, respectively. The PLA-AuNP-based assay renders an efficient, rapid, accurate, and selective quantification of MET in food, biological, and environmental samples. The proposed sensor provides an appropriate platform for fast and on-the-spot determination of MET without requiring a well-equipped lab setup.

Thallium - poisoner's poison: An overview and review of current knowledge on the toxicological effects and mechanisms.

Thallium (Tl) is one of the most toxic metals and its historic use in homicides has led it to be known as "the poisoner's poison." This review summarizes the methods for identifying Tl and determining its concentrations in biological samples in recently reported poisoning cases, as well as the toxicokinetics, toxicological effects, toxicity mechanisms, and detoxication methods of Tl. Recent findings regarding Tl neurotoxicological pathways and toxicological effects of Tl during pregnancy are also presented. Confirmation of elevated Tl concentrations in blood, urine, or hair is indispensable for diagnosing Tl poisoning. The kidneys show the highest Tl concentration within 24 h after ingestion, while the brain shows the highest concentration thereafter. Tl has a very slow excretion rate due to its large distribution volume. Following acute exposure, gastrointestinal symptoms are observed at an early stage, and neurological dysfunction is observed later: Tl causes the most severe damage in the central nervous system. Alopecia and Mees' lines in the nails are observed within 1 month after Tl poisoning. The toxicological mechanism of Tl is considered to be interference of vital potassium-dependent processes with Tl+ because its ionic radius is similar to that of K+, as well as inhibition of enzyme reactions by the binding of Tl to -SH groups, which disturbs vital metabolic processes. Tl toxicity is also related to reactive oxygen species generation and mitochondrial dysfunction. Prussian blue is the most effective antidote, and metallothionein alone or in combination with Prussian blue was recently reported to have cytoprotective effects after Tl exposure. Because Tl poisoning cases are still reported, early determination of Tl in biological samples and treatment with an antidote are essential.

Application of chemical attribution in matching OPNAs-exposed biological samples with exposure sources- based on the impurity profiles via GC × GC-TOFMS analysis.

Chemical attribution is a vital tool to attribute chemicals or related materials to their origins in chemical forensics via various chemometric methods. Current progress related to organophosphorus nerve agents (OPNAs) has mainly focused on the attribution of chemical sources and synthetic pathways. It has not yet been applied in matching exposed biological samples to their sources. This work used chemical attribution to explore organic impurity profiles in biological samples exposed to various OPNAs. Chemical attribution was first used to identify the exposure source of biological samples based on the full-scan data via comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometer (GC × GC-TOFMS). Taking peak area as the only variable, it can quickly match exposed samples to their sources by applying unsupervised or supervised models, screen difference compounds via one-way ANOVA or t-tests, and then identify valuable impurities that can distinguish different types of exposed samples. To further obtain the impurity profile only applicable to a certain weapon' samples, the irrelevant components were removed via conventional methods. The findings showed there were 53 impurities that can promote distinguishing six groups of OPNA exposed samples, as well as 42 components that can be used as valuable impurities to distinguish class G and class V samples. These were all unique impurities that appear in a certain weapon' samples. The outcomes can be a reference for tracing the source for OPNA-exposed samples, which was beneficial to the further development in source matching of forensic samples. Moreover, the chemical attribution for impurity profiles in biological samples after weapons exposure may inspire research into the characteristics of impurity profile in biological samples as well as practical applications of chemical attribution for OPNA-exposed samples, that may expand potential biomarkers and break the limits of existing markers in the future.

Seamless Integration of Rapid Separation and Ultrasensitive Detection for Complex Biological Samples Using Multistage Annular Functionalized Carbon Nanotube Arrays.

Efficient separation, enrichment, and detection of bacteria in diverse media are pivotal for identifying bacterial diseases and their transmission pathways. However, conventional bacterial detection methods that split the separation and detection steps are plagued by prolonged processing times. Herein, a multistage annular functionalized carbon nanotube array device designed for the seamless integration of complex biological sample separation and multimarker detection is introduced. This device resorts to the supersmooth fluidity of the liquid sample in the carbon nanotubes interstice through rotation assistance, achieving the ability to quickly separate impurities and capture biomarkers (1 mL sample cost time of 2.5 s). Fluid dynamics simulations show that the reduction of near-surface hydrodynamic resistance drives the capture of bacteria and related biomarkers on the functionalized surface of carbon nanotube in sufficient time. When further assembled as an even detection device, it exhibited fast detection (<30 min), robust linear correlation (101 -107 colony-forming units [CFU] mL-1 , R2 = 0.997), ultrasensitivity (limit of detection = 1.7 CFU mL-1 ), and multitarget detection (Staphylococcus aureus, extracellular vesicles, and enterotoxin proteins). Collectively, the material and system offer an expanded platform for real-time diagnostics, enabling integrated rapid separation and detection of various disease biomarkers.

Comparison of the applicability of electromembrane extraction and liquid-phase microextraction for extraction of non-polar basic drugs from different biological samples: Using clozapine as the model analyte.

Understanding and comparing the applicability of electromembrane extraction (EME) and liquid-phase microextraction (LPME) is crucial for selecting an appropriate microextraction approach. In this work, EME and LPME based on supported liquid membranes were compared using biological samples, including whole blood, urine, saliva, and liver tissue. After optimization, efficient EME and LPME of clozapine from four biological samples were achieved. EME provided higher recovery and faster mass transfer for blood and liver tissue than LPME. These advantages were attributed to the electric field disrupting clozapine binding to interfering substances. For urine and saliva, EME demonstrated similar recoveries while achieving faster mass transfer rates. Finally, efficient EME and LPME were validated and evaluated combined with liquid chromatography-tandem mass spectrometry (LC-MS/MS). The coefficient of determination of all methods was greater than 0.999, and all methods showed acceptable reproducibility (≤14%), accuracy (90%-110%), and matrix effect (85%-112%). For liver and blood with high viscosity and complex matrices, EME-LC-MS/MS provided better sensitivity than LPME-LC-MS/MS. The above results indicated that both EME and LPME could be used to isolate non-polar basic drugs from different biological samples, although EME demonstrated higher recovery rates for liver tissue and blood.

Slice through the water-Exploring the fundamental challenge of water suppression for benchtop NMR systems.

Benchtop NMR provides improved accessibility in terms of cost, space, and technical expertise. In turn, this encourages new users into the field of NMR spectroscopy. Unfortunately, many interesting samples in education and research, from beer to whole blood, contain significant amounts of water that require suppression in 1H NMR in order to recover sample information. However, due to the significant reduction in chemical shift dispersion in benchtop NMR systems, the sample signals are much closer to the water resonance compared to those in a corresponding high-field NMR spectrum. Therefore, simply translating solvent suppression experiments intended for high-field NMR instruments to benchtop NMR systems without careful consideration can be problematic. In this study, the effectiveness of several popular water suppression schemes was evaluated for benchtop NMR applications. Emphasis is placed on pulse sequences with no, or few, adjustable parameters making them easy to implement. These fall into two main categories: (1) those based on Pre-SAT including Pre-SAT, PURGE, NOESY-PR, and g-NOESY-PR and (2) those based on binomial inversion including JRS and W5-WATERGATE. Among these schemes, solvent suppression sequences based on Pre-SAT offer a general approach for easy solvent suppression for samples with higher analyte concentrations (sucrose standard and Redbull™). However, for human urine, binomial-like sequences were required. In summary, it is demonstrated that highly efficient water suppression approaches can be implemented on benchtop NMR systems in a simple manner, despite the limited spectral dispersion, further illustrating the potential for widespread implementation of these approaches in education and research.

Detection of Trace Elements Se, Cu, and Zn Levels in Biological Samples of Drug Abusers: Halani Sindh, Pakistan.

Illicit drug use has become a global issue, posing significant health, socioeconomic, and cultural risks. The study examined essential trace metals: selenium, zinc, and copper in blood concentrations, as well as in serum and scalp hair samples, from 240 male drug-abuse subjects/patients aged 18-45, categorized into three age groups. The study compared 45 healthy subjects of the same age group using an acid digestion method supported by a microwave oven during sample preparation. The technique of atomic absorption spectrometry was employed to identify essential and toxic elements, utilizing certified reference materials for accuracy. According to a recent study, plasma zinc and selenium concentrations in drug abusers are lower than those in referent subjects, potentially increasing vulnerability to infection due to poor nutritional status or other contaminants.

Protein-Aided Synthesis of Copper-Integrated Polyaniline Nanocomposite Encapsulated with Reduced Graphene Oxide for Highly Sensitive Electrochemical Detection of Dimetridazole in Real Samples.

Dimetridazole (DMZ) is a derivative of nitroimidazole and is a veterinary drug used as an antibiotic to treat bacterial or protozoal infections in poultry. The residues of DMZ cause harmful side effects in human beings. Thus, we have constructed a superior electrocatalyst for DMZ detection. A copper (Cu)-integrated poly(aniline) (PANI) electrocatalyst (PANI-Cu@BSA) was prepared by using a one-step method of biomimetic mineralization and polymerization using bovine serum albumin (BSA) as a stabilizer. Then, the synthesized PANI-Cu@BSA was encapsulated with reduced graphene oxide (rGO) using an ultrasonication method. The PANI-Cu@BSA/rGO nanocomposite had superior water dispersibility, high electrical conductivity, and nanoscale particles. Moreover, a PANI-Cu@BSA/rGO nanocomposite-modified, screen-printed carbon electrode was used for the sensitive electrochemical detection of DMZ. In phosphate buffer solution, the PANI-Cu@BSA/rGO/SPCE displayed a current intensity greater than PANI-Cu@BSA/SPCE, rGO/SPCE, and bare SPCE. This is because PANI-Cu@BSA combined with rGO increases fast electron transfer between the electrode and analyte, and this synergy results in analyte-electrode junctions with extraordinary conductivity and active surface areas. PANI-Cu@BSA/rGO/SPCE had a low detection limit, a high sensitivity, and a linear range of 1.78 nM, 5.96 µA µM-1 cm-2, and 0.79 to 2057 µM, respectively. The selective examination of DMZ was achieved with interfering molecules, and the PANI-Cu@BSA/rGO/SPCE showed excellent selectivity, stability, repeatability, and practicability.

Sol-gel Carbowax 20M-zwitterionic ionic liquid composite sorbent-based capsule phase microextraction device combined with HPLC/post-column derivatization for the determination of lanreotide, a human somatostatin analogue in urine.

In this research, a sol-gel Carbowax 20M-zwitterionic ionic liquid composite sorbent-based capsule phase microextraction (CPME) device was developed in combination with liquid chromatography-post column derivatization for the first ever reported determination of a somatostatin analogue - lanreotide in human urine. The sol-gel Carbowax 20M-zwitterionic ionic liquid composite sorbent was encapsulated in the lumen of a polypropylene capillary tube and characterized by FT-IR spectroscopy and SEM with energy dispersive X-ray spectroscopy (EDS). The main steps of the CPME workflow were optimized to obtain high extraction efficiency for the target analyte. After the separation of the analyte on a C8 stationary phase, the peptide was derivatized online with o-phthalaldehyde before the fluorescence detection. The main experimental parameters of CPME and the post-column procedures were systematically investigated and optimized. The method was validated in terms of selectivity, linearity, accuracy, precision, limits of detection (LOD), and limits of quantification (LOQ). The relative bias ranged between 88.8 and 115.6 % for the peptide, while the RSD values for repeatability and intermediate precision were less than 14.3 %. The achieved limit of detection (LOD) was 0.2 µΜ while the limit of quantitation (LOQ) was established as 0.9 µΜ. Finally, the sol-gel Carbowax 20M-zwitterionic ionic liquid composite sorbent-based microextraction capsules were found to be reusable for at least 20 extractions. The developed method presented adequate overall performance, and it could be applied in the analysis of selected peptide in human urine samples.

Optimization and validation of a bioanalytical HPLC-UV technique for simultaneous determination of underivatized phenylalanine and tyrosine in the blood for phenylketonuria diagnosis and monitoring.

This study aimed to develop a fast, accurate, and precise high-performance liquid chromatography with UV detection method for simultaneous analysis of underivatized phenylalanine (Phe) and tyrosine (Tyr) in biological samples. Separation of the analytes was accomplished using a Discovery HS F5-3 column, which offered better retention and peak symmetry for the tested analytes. Chromatographic conditions were optimized using central composite experimental design, and three factors were investigated: the concentration of ammonium acetate (A), the acetonitrile proportion in the mobile phase (B) and the column oven temperature (C). The approach was verified using ß-expectation tolerance intervals for total error measurement that did not exceed 15%. Optimal settings were A = 50 mm, B = 24% and C = 28°C. The method applicability was determined using human plasma from 75 volunteers. The limits of detection and quantification of the technique were satisfactory at 9 and 29 µm for Phe and 4 and 13 µm for Tyr. The mean analytical bias in spiking levels was acceptable, ranging from -1.649 to +1.659% for both substances, with RSD <5% in all instances. The suggested approach was successfully used to analyze Phe and Tyr in human blood samples and calculate the Phe/Tyr ratio.